banner



How To Change Valve Gasket On 2000 Honda Accord

How to Modify The Fuel Pump in a 1993 Honda Accordance

by Zyon Silket

itstillruns article image

Thinkstock/Comstock/Getty Images

The fuel pump in the 1993 Honda Accordance attaches to the outside of the fuel tank. This makes it an easier and safer job for the exercise-it-yourself mechanic who wants to avert being charged a lot of money to have a repair facility supervene upon the fuel pump. The fuel pump uses pressure to forcefulness the fuel from the tank to the engine. When the pump fails, the engine cannot go enough fuel to run properly.

Step 1

Disconnect the negative battery cable from the bombardment with a socket and ratchet.

Step 2

Jack the rear end of the vehicle upwards and place information technology on jack stands.

Step 3

Remove the gas cap to salve pressure level on the fuel organisation.

Footstep 4

Remove the left front bicycle from the vehicle using an affect wrench or tire iron.

Step v

Remove the bolts that secure the fuel pump encompass on to the left side of the gas tank housing with a socket and ratchet. You can easily locate the fuel pump because the metallic fuel line goes into the cover.

Step six

Remove the iii bolts that secure the fuel pump to its mounting location with a socket and ratchet.

Step 7

Disconnect the electric connectors from the fuel pump.

Step viii

Disconnect the fuel hose clamp with pliers and and then pull the flared fuel line fitting from the hose thus releasing the pump from the hose.

Pace 9

Slide the flared fuel line plumbing fixtures onto the pump and secure it with the fuel hose clench using your pliers.

Footstep 10

Commodities the new pump onto the pump's mounting location using the three bolts and a socket and ratchet.

Pace xi

Reattach the wiring connectors to the fuel pump by pushing the two connectors together.

Pace 12

Secure the fuel pump cover to the left side of the gas tank.

Step 13

Identify the wheel dorsum onto the vehicle and secure it with the lug nuts using the bear upon wrench or tire iron.

Step 14

Close the gas cap.

Stride 15

Remove the vehicle from the jack stands.

Reconnect the negative battery cable to the battery using a socket and ratchet.

More Articles

Source: https://itstillruns.com/change-pump-1993-honda-accord-7394849.html

Posted by: harristuddly.blogspot.com

0 Response to "How To Change Valve Gasket On 2000 Honda Accord"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel